Removing The Brake Disc Of The Front Brake; Installing The Brake Disc Of The Front Brake; Changing The Front Wheel Bearing - Husqvarna FS 450 2015 Repair Manual

WHEELS
14
14.6.3

Removing the brake disc of the front brake

14.6.4

Installing the brake disc of the front brake

14.6.5

Changing the front wheel bearing

-
Remove the fixation of the hand brake lever.
-
Remove the motorcycle from the lift stand.
Operate the front brake and compress the fork a few times firmly.
✓ The fork legs straighten.
-
0.
Tighten screws
Guideline
I
Screw, fork stub
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
O.
Remove screws Take off the brake disc.
Main work
-
Clean the contact surface of the brake disc.
-
Position the brake disc with the label facing outward. Mount and tighten
O.
screws
Guideline
Screw, front brake disc
Finishing work
-
Install the front wheel. (a
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
Remove shaft seal rings
(a p. 10)
(� p. 10)
(� p. 93)
14 Nm
M6
(10.3 lbf ft)
p. 94)
(a p. 10)
(a p. 93)
O 8.
and
95
I
1 Nm (11.1 lbf ft)
1 5
Loctite ® 243
™