Husqvarna FE 350 2015 Repair Manual page 208

21 LUBRICATION SYSTEM
If the measured value is less than the specification:
-
Check the oil pumps for wear. Check all oil holes for free flow.
Switch off the engine.
Warning
Danger of burns Some vehicle components get very hot when the
machine is driven.
-
Wear appropriate protective clothing and safety gloves. In case of
burns, rinse immediately with lukewarm water.
Remove the special tools.
Mount and tighten the release screw of the chain adjuster.
Guideline
Screw, unlocking of timing chain ten­
sioner
M10x1 8 Nm (5.9 lbf ft)
206