Installing The Left Engine Case; Installing The Spacer; Installing The Timing Chain - Husqvarna FE 350 2015 Repair Manual

ENGINE
18
18.5.6

Installing the left engine case

18.5.7

Installing the spacer

18.5.8

Installing the timing chain

-
Mount the dowels.
-
Degrease the sealing area. Apply sealing compound to the left section of the
engine case.
I
Loctite 591 O
®
-
Mount the left section of the engine case. If necessary, strike it lightly with a rub­
ber mallet and turn the transmission shafts.
• Info
I
Do not use the screws to pull the two sections of the engine case
together.
O
-
Mount screws but do not tighten yet.
I Guideline
Screw, engine case
8
-
Mount screws but do not tighten yet.
I Guideline
Screw, engine case
-
Mount screws @) but do not tighten yet.
I Guideline
Screw, engine case
0, 8,
-
Tighten screws
I
Guideline
Screw, engine case
-
Mount the screw connection of the engine fixing arm.
-
Grease the shaft seal ring.
O.
-
Mount spacer
O
-
Mount balancer shaft
• Info
I
If the timing chain was used before, ensure it is running in the correct
direction.
Mount and tighten screw
Guideline
Screw, timing chain
securing guide
I
M6x55
I
M6x65
I
M6x85
and @) .
I
M6
with the timing chain and timing chain securing guide.
8.
10
M6 Nm
(7.4 lbf ft)
179
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
1 10
Nm (7.4 lbf ft)
Loctite 243
® ™