Spark Arrestor, Cleaning - Husqvarna FE 350 2015 Repair Manual

EXHAUST
10
Danger of burns The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Soot particles accumulate on the screen of the spark arrestor over time.
This changes the performance characteristics.
Preparatory work
-
Remove the right side cover.
-
Remove the main silencer.
e-
Main work
O
-
Remove screws and take off silencer cap @} with O-ring @).
Warning
Danger to health
-
Wear suitable breathing and eye protection when cleaning the main silencer and carbon screen.
-
Clean main silencer housing
-
Mount a new 0-ring@) on silencer cap@}.
-
Position silencer cap@. Mount and tighten screws
I Guideline
Screws on the main silencer
Finishing work
-
Install the main silencer.
-
Install the right side cover.
(� p. 76)
•--�
(l!,JI p. 71)
•--�
Soot particles irritate the eyes and mucuous membranes.
0
C,
and screen of the spark arrestor with compressed air.
O.
(l!,JI p. 71)
(� p. 77)
CG - - •
�--•
402269-10
I
7 Nm (5.2 lbf ft)
73