14 WHEELS
14.7.3
14.7.4
122
Changing the front brake disc
Info
If the brake discs are changed, the brake linings must also be changed.
Changing the front wheel bearing
-
Remove the motorcycle from the lift stand.
-
Operate the front brake and compress the fork a few times
firmly.
✓ The fork legs straighten.
-
0.
Tighten screws
Guideline
I Screw, fork stub
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
O.
Remove screws
Remove the brake disc.
Clean the contact surface of the brake disc.
-
Position the new brake disc with the label facing outward.
-
Mount and tighten screws
Guideline
Screw, front
M6
brake disc
Finishing work
-
Install the front wheel.
(8
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
Remove shaft seal rings
(8
p. 12)
1
Nm (11.1 lbf ft)
1
5
(0
p. 12)
(0
p. 120)
O.
14 Nm (10.3 lbf ft)
Loctite
p. 121)
(0
p. 12)
(0
p. 120)
O
8.
and
®
243
™