Checking The Routing Of The Throttle Cable; Checking The Play In The Throttle Cable - Husqvarna FE 350 2015 Repair Manual

HANDLEBAR,CONTROLS
7
7.4
Checkin the routing of the throttle cable
7.5
Preparatory work
-
Remove the seat.
-
Remove the fuel tank.
Main work
(FE EU/ AU/US)
-
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side
behind the handlebars and above the fuel tank bearing.
If the throttle cable is not routed as specified:
Correct the throttle cable routing.
(FE 350S US)
-
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side
behind the handlebars and above the fuel tank bearing.
If the throttle cable is not routed as specified:
-
Correct the throttle cable routing.
Finishing work
-
Install the fuel tank.
-
Mount the seat.
in the throttle cable
-
Check the throttle grip for smooth operation.
-
Move the handlebar to the straight-ahead position. Move the throttle grip back
and forth slightly to ascertain play
I
Play in throttle cable
»
If the throttle cable play does not meet specifications:
-
Adjust the play in the throttle cable.
(� p. 77)
(� p. 77)
(!!:! p. 79)
(!!:! p. 77)
f)
in the throttle cable.
I
3 ... 5 mm (0.12 ... 0.2 in)
(� p. 40)
39