Installing The Fuel Tank - Husqvarna FE 350 2015 Repair Manual

12
FUEL TANK, SEAT, TRIM
m
12.8

Installing the fuel tank

Danger
Fuel is highly flammable.
Fire hazard
The fuel in the fuel tank expands when warm and can escape if overfilled.
-
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
-
Switch off the engine for refueling.
-
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
-
If any fuel is spilled, wipe it off immediately.
-
Observe the specifications for refueling.
A
Warning
Danger of poisoning
-
Avoid skin, eye and clothing contact with fuel.
-
Immediately consult a doctor if you swallow fuel.
-
Do not inhale fuel vapors.
-
In case of skin contact, rinse the affected area with plenty of water.
-
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
-
Change your clothing in case of fuel spills on them.
Fuel is poisonous and a health hazard.
Main work
-
Check the routing of the throttle cable.
-
Position the fuel tank and fit the two spoilers to the sides of the radiator bracket.
-
Make sure that no cables are trapped or damaged.
-
Mount the fuel tank breather.
-
Mount and tighten screw
Guideline
I
Remaining screws, chassis
-
Position the collar bushings and horn, fit and tighten screws
Guideline
I
Remaining screws, chassis
-
Attach the connector of the horn.
-
Attach connector
-
Remove the wash cap set.
-
Thoroughly clean the plug-in connection of the fuel line using compressed air.
• Info
I
Never let dirt enter the fuel line. Dirt in the fuel line clogs the injection
valve.
-
Lubricate the O-ring and connect plug-in connection
• Info
I
Route the cable and fuel line at a safe distance from the exhaust system.
Finishing work
-
Mount the seat.
(� p. 39)
O
with the rubber bushing.
(D
of the fuel pump.
(� p. 77)
79
I 10Nm(7.41bf ft)
8.
10 Nm (7.4 lbf ft)
8
of the fuel line.