EXHAUST
10
Removin the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down before performing any work on the vehicle.
Changing the glass fiber �arn filling in the main silencer
Warning
The exhaust system gets very hot when the vehicle is driven.
Danger of burns
-
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
-
Install the right side cover.
-
Mount the seat.
(a
p. 77)
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Remove the right side cover.
Main work
O.
-
Disconnect spring
I
Spring hook (50305017000)
Remove screws @ and take off the main silencer.
Main work
-
Mount the main silencer. Mount screws
-
Reconnect spring @ .
I
Spring hook (50305017000)
O.
-
Tighten screws
I
Guideline
Remaining screws, chassis
Finishing work
-
Install the right side cover.
Preparatory work
-
Remove the right side cover.
-
Remove the main silencer.
(la,!
p. 77)
(a
p. 11)
(la,!
p. 76)
(la,!
p. 289)
O
but do not tighten yet.
(!!:!
p. 289)
(la,!
p. 77)
(la,!
p. 76)
(la,!
p. 71)
71
10 Nm (7.4 lbf ft)