Lubricating The Steering Head Bearing - Husqvarna FE 350 2015 Repair Manual

6
FORK, TRIPLE CLAMP
6.24 Lubricatin the steerin
t9· ·
J, .
-
Push the outer tube up.
-
Clamp the outer tube in the area of the lower triple clamp.
I
Clamping stand (T1403S)
-
Tighten screw cap@).
Guideline
I
Cartridge on outer tube
I
Special socket (T14047)
201701-11
-
Mount the adjuster. Mount and tighten screw
I
Guideline
Screw, adjuster
201700-11
Alternative 1
-
Turn the adjuster of compression damping 41) (mark
of rebound damping
Guideline
Rebound damping
Comfort
Standard
Sport
Compression damping
Comfort
Standard
Sport
-
Turn counterclockwise by the number of clicks corresponding to the fork
type.
Alternative 2
Warning
Danger of accident
seriously alter the handling characteristic.
Extreme modifications to the suspension setting may cause a serious
deterioration in the handling characteristic and overload components.
-
-
-
Set the adjusters to the positions determined upon removal.
head bearin
-
Remove the lower triple clamp.
-
Install the lower triple clamp.
800010-10
(� p. 298)
I
M51x1.5
(!!l p. 298)
I
M4x0.5
48
(mark REB) all the way clockwise.
Modifications to the suspension setting may
Only make adjustments within the recommended range.
Ride slowly to start with after making adjustments to get the feel of
the new handling characteristic.
(� p. 32)
(� p. 33)
I
40 Nm (29.5 lbf ft)
@).
2.5 Nm
1
(1.84 lbf ft)
and the adjuster
COMP)
15 clicks
13 clicks
11 clicks
15 clicks
13 clicks
11 clicks
31
I