Husqvarna FE 350 2015 Repair Manual page 106

WHEELS
14
Main work
0-
Remove shaft seal ring
8.
-
Remove lock ring
-
Remove shaft seal ring (5).
-
Using a suitable tool, press bearing
0-
-
Remove spacing tube
-
Using a suitable tool, press bearing
C)
-
Press new bearing all the way in from the outside to the inside.
• Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
-
Clean, grease, and mount spacing tube
I
Long-life grease (ilill p. 286)
C,
-
Press new bearing all the way in from the outside to the inside.
• Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
C,
out from the inside to the outside.
C)
out from the inside to the outside.
0.
104