Wiring Harness, Battery; Changing The Main Fuse; Changing The Fuses Of Individual Power - Husqvarna FE 350 2015 Repair Manual

15

WIRING HARNESS, BATTERY

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
-
Only use fuses with the required ampere value.
-
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the air filter box lid.
Changing the fuses of individual
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
-
Switch off all power consumers and switch off the engine.
-
Remove the air filter box cover.
Main work
-
Remove protection caps
-
Remove the faulty main fuse @.
Info
•
I
A defective fuse can be identified by the burned-out fuse wire
8
A reserve fuse
-
Install a new main fuse.
I
Fuse (58011109120) (i!!l
-
Check that the electrical equipment is functioning properly.
• Tip
I
Insert the spare fuse so that it is available if needed.
-
Mount the protection caps.
Finishing work
-
Install the air filter box cover.
ower consumers
Preparatory work
-
Switch off all power consumers and switch off the engine.
-
Remove the seat. (i!!l p. 77)
Main work
(FE EU/ AU/US)
-
Open fuse box cover
(i!!l p. 74)
O.
is located in the starter relay.
p. 215)
(i!!l p. 74)
O.
106
e.