Table of Contents
Advertisement
14.7.2
Installing the front wheel
Warning
Danger of accidents
-
Always keep the brake discs free of oil and grease.
-
Clean the brake discs with brake cleaner when necessary.
14.7.3
Removing the front brake disc
Oil or grease on the brake discs reduces the braking effect.
Check the wheel bearing for damage and wear.
If the wheel bearing is damaged or worn:
-
Change front wheel bearing.
Clean and grease the shaft seal rings
face
of the spacers.
f)
I
Long-life grease
-
Insert the spacers.
-
Lift the front wheel into the fork, position it, and insert the
wheel spindle.
✓ The brake linings are positioned.
-
Mount and tighten screw
Guideline
Screw, front wheel
spindle
-
Activate the hand brake lever multiple times until the brake
linings are in contact with the brake disc.
-
Remove the motorcycle from the lift stand.
-
Pull the front brake and compress the fork forcefully a few
times.
✓ The fork legs straighten.
-
Tighten screws
Guideline
I
Screw, fork stub
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
Remove screws
(a
p. 110)
O
and bearing sur
(il!l
p. 308)
8.
M24x1 .5
45 Nm (33.2 lbf ft)
(�
fD.
15 Nm (11.1 lbf ft)
1
(�
p. 12)
(il!l
p. 1 08)
O.
Take off the brake disc.
14 WHEELS
p. 12)
..
109
Advertisement
Table of Contents
