Table of Contents
Advertisement
Before You Begin
1.6
Model 3711 administration overview
To administer the Model 3711 effectively, you should know why, when, and how to perform the
following tasks:
•
Writing to flash memory
•
Saving configuration to a file
•
Downloading configuration data to the Model 3711
•
Removing and restoring power to the Model 3711
•
Performing the different types of warm starts and cold starts
•
Updating user programs
•
Updating the Model 3711 firmware
•
Upgrading the Model 3711 hardware
Information on these tasks is provided in Chapter 14.
1.7
Documentation resources
Table 1-1 lists documentation resources for other required or useful information. All listed documents
are available on the Micro Motion web site.
Table 1-1
Documentation resources
Topic
Model 3711 installation
Sensor installation
Core processor installation (if not installed
with sensor)
Writing host programs using ROC protocol
TLP system
Using the Modbus host user program
Using the core processor Modbus interface
1.8
Micro Motion customer service
For customer service, phone the support center nearest you:
•
In the U.S.A., phone 1-800-522-MASS (1-800-522-6277)
•
In Canada and Latin America, phone (303) 527-5200
•
In Asia, phone (65) 6770-8155
•
In the U.K., phone 0800 - 966 180 (toll-free)
•
Outside the U.K., phone +31 (0) 318 495 670
4
Document
Micro Motion Model 3711 Gas Flow Computers: Installation Manual
Appropriate sensor installation manual
Micro Motion Model 3711 Gas Flow Computers: Installation Manual
ROC Protocol User Manual
Modbus Host User Program Manual
Using Modbus Protocol with Micro Motion Transmitters (manual and map)
Modbus Mapping Assignments for Micro Motion Transmitters (map only)
®
Micro Motion
Model 3711 Gas Flow Computers
Advertisement
Table of Contents
Troubleshooting
