Emerson Micro Motion 3711 Configuration And Use Manual page 119

Function Sequence Tables
Within each function:
• Labels are used to identify functions and to enable branching. A label can contain a maximum
of six characters. Enter the value manually.
• A command specifies the action to be taken by a function. See Section 11.8 for definitions of
all FST commands that can be used with the Model 3711. To enter a command:
a. Click inside the CMD field, then click on the ellipsis symbol. The FST Commands dialog
box is displayed, as shown in Figure 11-2.
b. Double-click the desired command.
• An argument can be:
- A reference to a parameter in the Model 3711
- A numeric constant
- An ASCII string
The Select TLP dialog box is used to enter a parameter reference. Numeric constants and
ASCII strings are entered manually.
Figure 11-2 FST Commands dialog box
Configuration and Use Manual 111