Emerson Micro Motion 3711 Configuration And Use Manual page 226

Opcode Tables
Figure E-1
2. Select the opcode table to use from the dropdown list.
3. Enter a version number for this opcode table. This value is used only for version tracking of
opcode tables. Update it whenever you update the opcode table.
4. Using the Select TLP dialog box, configure data points as required, mapping contiguous data
points in the opcode table to non-contiguous memory locations in the Model 3711.
Note: You do not need to configure all data points in the opcode table.
5. Click
218
Opcode Table dialog box
or .
Apply OK
®
Micro Motion Model 3711 Gas Flow Computers