Emerson Micro Motion 3711 Configuration And Use Manual page 26

System Configuration
To manage device security:
1. Connect to the Model 3711.
2. Click
showing the default operator ID. Passwords are concealed. The default password is
Note: Access level 5 is required to open the Device Security dialog box. If you want to change security
settings after initial setup is complete, you must use an operator ID with this access level.
Figure 3-3
3. To add an operator ID:
a. Click on any empty cell in the table. The Device Security popup will be displayed (see
Figure 3-4).
Figure 3-4
18
. The Device Security dialog box shown in Figure 3-3 is displayed,
Device > Security
Device Security dialog box
Device Security popup
®
Micro Motion Model 3711 Gas Flow Computers
.
1000