Hardware Preparation And Installation; Overview; Unpacking And Inspecting The Rtm - Emerson RTM-ATCA-F140 Installation And Use Manual

Hardware Preparation and Installation

2.1

Overview

Inspect the shipment and unpack the RTM.

Make sure environmental and power requirements are met.

Install the RTM.

2.2

Unpacking and Inspecting the RTM

Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the blade can damage

circuits or shorten its life.
Before touching the blade or electronic components, make sure that you are working in

an ESD-safe environment.
The shelf should provide minimum airflow to the RTM slot according to the class B.4
requirements of the CP-TA Inter-operability document AdvancedTCA Book 1.1. This includes
the following:
2.0 cfm at 25 °C ambient temperature

2.8 cfm at 40 °C ambient temperature

4.4 cfm at 55 °C ambient temperature

Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:
Printed Quick Start Guide and Safety Notes Summary

RTM-ATCA-F140

RTM-ATCA-F140 Installation and Use (6806800M97A)
EA Version
Chapter 2
21