Emerson Micro Motion 3711 Configuration And Use Manual page 164

Model 3711 Operator Interface
To write to Modbus registers on the core processor:
1. For each register that you will write to:
a. Enter its register number in the
b. Specify its data type.
c. Specify the data value to be written.
2. To write to specific registers:
a. Check the
b. Click
3. To write to all defined registers, click
The
Register Description
not saved to the core processor; however, they are saved to SRAM, and may be saved from there to
flash memory or to a file.
156
for each register you want to read.
Write Flag
.
Apply
field can be used for operator convenience. The contents of this field are
field.
Register #
.
Write All
Micro Motion
®
Model 3711 Gas Flow Computers