Emerson Micro Motion 3711 Configuration And Use Manual page 103

Monitoring and Displays
Figure 9-2 I/O Monitor dialog box
To specify the I/O data that will be included on the display:
1. Expand the I/O types to display all options.
2. Check the desired options.
3. Click OK
The I/O monitor is activated, displaying the selected values.
The I/O monitor is displayed in a ROCLINK 800 window, and Auto Scan is automatically enabled.
The I/O monitor remains available until you close the window, disconnect from the Model 3711, or
exit ROCLINK 800.
Figure 9-3 shows an example of an I/O monitor configured to display data from four analog inputs.
Note: For information on viewing the results of the volumetric flow calculations, see Section 13.2.
Configuration and Use Manual
.
95