Emerson Micro Motion 3711 Configuration And Use Manual page 158

Model 3711 Operator Interface
Figure 13-1 Rates & Totals window
Table 13-1 Rates & Totals parameters
Parameter
Input Values
Mass Flow Rate
Flowing Pressure
Flowing
Temperature
Base Density
Flowing Density
150
Description
Current mass flow rate. May or may not be corrected for
pressure, depending on configuration.
Current pressure value from configured pressure input.
Current temperature value from configured temperature
input.
Current base density value from configured base density
input.
Current flowing density value from configured flowing
density input.
Comments
See Section 6.3.1 for information
on configuring the pressure input.
See Section 6.3.1 for information
on configuring the temperature
input.
See Section 6.3.1 for information
on configuring the base density
input.
See Section 6.3.1 for information
on configuring the flowing density
input.
®
Micro Motion Model 3711 Gas Flow Computers