Maintenance Information Window; Checking Maintenance Information - Omron SmartSlice GRT1-OD4G-1 Operation Manual

Maintenance Information Window

4-5 Maintenance Information Window
4-5-1

Checking Maintenance Information

60
5. After checking that the settings are reflected in the Edit Unit Parameters
Window, click the General Tab, click the Download Button, and then click
the Reset Button.
6. Click the OK Button.
This section describes the Maintenance Information Window, which can be
used to check the status of the Digital I/O Units. The Monitor Device Window
can be used to check the same Unit status information, but the examples in
this section use the Maintenance Information Window.
From the Programming Device's Main Window, click the right mouse button
and select Maintenance Information. (From the Maintenance Mode Win-
dow, double-click the icon of the desired Unit.)
Click the I/O Module Tab, select the desired Unit, and click the View Button
to display the Unit's Maintenance Information Window.
Section 4-5