I/O Data - Omron SmartSlice GRT1-OD4G-1 Operation Manual

Overview of the Temperature Input Units
Flow of Data in Temperature Input Units
Moving average, scal-
ing enabled/disabled
Six types of data
Temperature
input value 1
Peak value 2
Bottom value 3
Top value 4
Valley value 5
Rate of change 6
Note
6-1-7

I/O Data

Temperature Input
Units
Input Data
Input data
Temperature Data Normal
Display (4 input bytes)
Temperature Data 1/100 Dis-
play (8 input bytes)
Top/Valley Detection Timing
Flags (2 input bytes)
The Comparator can be used
Comparator
with values allocated as
temperature data.
Temperature Status Flags
(allocated I/O data)
By default, the temperature input values are allocated to the Master without
any processing.
For inputs 0 and 1, temperature data can be separately selected, as shown in
the following diagram.
Math
Input 0
processing
Math
Input 1
processing
A Temperature Input Unit supports the following six types of input data, and
one type of output data. The required data can be allocated for use as I/O.
The default input value "Temperature Data Normal Display." No data is output
by default.
• Used to monitor temperature data.
• Select one type of data from temperature input value, peak value, bottom value, top
value, valley value, or rate of change. (Default allocation: Temperature input value)
Note The comparator can be used with temperature data.
Top/Valley Detection Timing Flags are allocated in one word. These flags are allocated
together with the top value or valley value and are used to time reading the values held in
the Master.
1/100 Display (2 words/input)
Temperature data
(allocated I/O data)
Normal Display (1 word/input)
Temperature data
(allocated I/O data)
Analog input
Temperature data
value
Other process-
ing results
Analog input
Temperature data
value
Other process-
ing results
Details
Section 6-1
Either can be allocated
for the Master as
temperature data.
161