I/O Data Allocation Methods - Omron SmartSlice GRT1-OD4G-1 Operation Manual

Temperature Input Units
Note
Dimensions
6-4-3

I/O Data Allocation Methods

182
4. Select the General Tab, and then click the Reset Button to reset the de-
vice.
5. Finally, click the OK Button to finish.
In 1/100 Display Mode, the temperature data will be converted to two places
below the decimal even though the actual resolution is not 0.01°C (or °F).
Consequently, the 0.1°C/ °F or 0.01°C/ °F display digits may jump back and
forth between values. Treat any values displayed beyond the specified input
resolution as reference data.
15
Either the default settings (i.e., the temperature input values) can be used, or
the Setting Tool can be used to allocate Status Flags or other settings other
than the temperature input value.
(88.5)
14.1 74.4
(74.4)
OMRON
Section 6-4