Omron SmartSlice GRT1-OD4G-1 Operation Manual page 10

Section 7 provides information required to operate Counter Units and Positioning Units, including
functions, status areas, windows, specifications, wiring, I/O data assignments, and settings.
Section 8 provides the basic specifications and shows the components, wiring diagrams, and dimen-
sions for the other Units used in Slice I/O Terminals.
Section 9 describes error processing and troubleshooting procedures needed to keep the Slice I/O
Units operating properly.
The Appendices provide information on using explicit messages; tables of standard models, power
consumptions, current consumptions, and weights; and precautions for using two-wire DC sensors.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
x