Ordering Information; Digital I/O Units; General Specifications - Omron CK3W-MD71 0 Series Quick Start Manual

Ordering Information

Digital I/O Units

Product name
Digital I/O Unit

General Specifications

This section describes the Motion Controller specifications.
Item
Enclosure
Grounding Method
Ambient Operating Temperature
Ambient Operating Humidity
Atmosphere
Ambient Storage Temperature
Operating Environment
Vibration Resistance
Shock Resistance
Insulation Resistance
Dielectric Strength
Applicable Standards
Number of inputs Number of outputs
16
Mounted in a panel
Ground to less than 100 Ω.
0 to 55°C
10% to 95% (with no condensation or icing)
Must be free of corrosive gases.
-25 to 70°C (with no condensation or icing)
Conforms to IEC 60068-2-6.
5 to 8.4 Hz with 3.5-mm amplitude,
8.4 to 150 Hz, acceleration of 9.8 m/s
100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)
Conforms to IEC 60068-2-27.
147 m/s 2 , 3 times each in X, Y, and Z directions
20 MΩ min. between isolated circuits (at 100 VDC)
510 VAC between isolated circuits for 1 minute with a leakage current of 5 mA max.
cULus, EU: EN 61326, RCM, KC, EAC
CK3W-MD71@0
Digital I/O Unit
I/O type
NPN
16
PNP
Specification
2
Model
CK3W-MD7110
CK3W-MD7120
4