Version Information; Component And Functions - Omron GI-SMD/SID Quick Start Manual

GI-SMD/SID

Version Information

This section describes the combinations that can be used of the unit versions of the Safety CPU Unit and the Communication Control Unit, Machine
Automation Controller, and the version of the Sysmac Studio.
Safety I/O terminal
Model Unit version
GI-SMD1624 Ver. 1.0
GI-SID1224 Ver. 1.0

Component and Functions

This section describes the names and functions of the parts of the safety I/O terminal.
(A) (B)
(E) (F)
Symbol
A Rotary switch
B LED indicator
C Top terminal block
D Memory cassette slot
E Built-in EtherNet/IP port (PORT1)
F Built-in EtherNet/IP port (PORT2)
G Bottom terminal block
H Unit specifications
I DIN Track mounting hooks
J ID information indication
* Connection of output device is for GI-SMD1624 only.
5
Safety CPU Unit
Communication Control Unit
NX-SL5700
NX-SL5500
Ver. 1.3 Ver. 1.01
Ver. 1.3 Ver. 1.01
(C)
(D)
(G)
(H)
Name
Used to set the mode switching and IP address of the built-in EtherNet/IP ports (PORT1/PORT2), in
hexadecimal expression.
Shows the operation, signal, power supply and statuses of the safety I/O terminal itself by LED.
Terminal block to connect unit power supply, grounding, and input devices.
A memory cassette is set on delivery. The memory cassette allows a user to inherit the settings when
replacing GI-S-series.
Connects the built-in EtherNet/IP with an Ethernet cable.
Connects the built-in EtherNet/IP with an Ethernet cable.
Terminal block to connect output power supply and input/output devices. *
Shows the product information, standards marking, and ID information (lot number/unit version) of
the safety I/O terminal.
These hooks are used to mount the Unit to a DIN Track.
Shows the ID information (MAC address) of the safety I/O terminal.
Corresponding unit version/version
Machine Automation
Controller
NX-CSG320
NX102-
Ver. 1.31
Ver. 1.31
(I)
Description
Sysmac Studio
Ver. 1.24
Ver. 1.24
(J)