Omron SmartSlice GRT1-OD4G-1 Operation Manual page 204

Temperature Input Units
I/O Data
Temperature Data Normal
Display Mode
(Temperature Data)
184
4. Click the General Tab and select the desired I/O data from the pull-down
menu on the Default Connection Path (In) Field. In the following example
Temperature Data is selected.
5. Click the Download Button to download the setting, and then click the OK
Button to return to the Edit Device Parameters Window.
6. Click the General Tab and, then click the Reset Button to reset the device.
7. Click the OK Button to exit.
Temperature data is used to monitor temperature input values. The tempera-
ture input values are allocated as the default settings, but any one of the fol-
lowing can be allocated: temperature input value, peak value, bottom value,
top value, valley value, or rate of change.
Note The comparator function can be used for the data allocated as the Tempera-
ture Data.
Section 6-4