Omron SmartSlice GRT1-OD4G-1 Operation Manual page 283

GRT1-CP1-L Positioning Unit
Functions Shared by
All Units
Setting Digital Output
Functions
1,2,3...
Refer to the following sections for the items on the General Tab Page.
Function
Comment
Unit Conduction Time
Last Maintenance Date
■ Default Settings
The Default Setting Button on the General Tab Page will download the default
settings for all parameters on all tabs to the Positioning Unit. The values on
the tab pages will not be updated.
A Positioning Unit supports two digital outputs. Use the following procedure to
set functionality. The digital outputs can also be controlled according to the
counter value in comparison to user-set ranges. Refer to Range 0 and Range
1 Tab Pages on page 269 for details.
1. Click the OUT Tab in the Edit Unit Parameters Window to display the OUT
Tab Page shown below.
2. Select the digital output (No. 00 or 01) and click the Edit Button. The Edit
Terminal Dialog Box will be displayed.
Reference
2-3-5 Unit Comments
2-3-4 Unit Conduction Time Monitor
2-3-8 Last Maintenance Date
Section 7-5
263