Omron SmartSlice GRT1-OD4G-1 Operation Manual page 190

Temperature Input Units
170
The following are exceptions.
Input type
K, T, or N below −100°C
U, L, or PL2
R or S below 200°C
B below 400°C
W
Mounting Direction
(1)
(3)
Units Supporting an Indication Accuracy of ±2°C ±1 Digit Max.
GRT1-ID4
GRT1-ID4-1
GRT1-ID8
GRT1-ID8-1
GRT1-IA4-1
GRT1-IA4-2
GRT1-OD4
GRT1-OD4-1
GRT1-OD4G-1
GRT1-OD8
GRT1-OD8-1
GRT1-OD8G-1
GRT1-ROS2
GRT1-DRT
GRT1-PRT
Indication Specifications Dependence on Combination of Terminal Block
■
and Main Block
A cold junction compensator is included in the terminal block of the
GRT1-TS2T. If only the main block is replaced, the serial numbers of the ter-
minal block and the main block will no longer match and an extra ±1°C must
be added to the indication accuracy. The serial numbers can be found on the
side of each block as shown in the following figure.
± ° ±
7 C 1 digit max.
± ° ±
7 C 1 digit max.
± ° ±
7 C 1 digit max.
Not specified.
± ° ±
9 C 1 digit max.
(2)
(4)
(5)
(6)
Slice I/O Units
GRT1-TS2P
GRT1-TS2PK
GRT1-TS2T
GRT1-CT1
GRT1-CT1-1
GRT1-CPL-1
Communications Units
Section 6-4
Input accuracy
GRT1-PD2
GRT1-PD2G
GRT1-PD8
GRT1-PD8-1
GRT1-PC8
GRT1-PC8-1
GRT1-TBR
GRT1-TBL
GRT1-END