Omron SmartSlice GRT1-OD4G-1 Operation Manual page 74

Functions of Digital I/O Units
Setting with a
Programming Device
1,2,3...
54
This example shows how to use the DeviceNet Configurator (version 2.43 or
higher) to set the Contact Operation Counter function.
1. Open the Network Configuration Window and double-click the desired
Slice I/O Terminal's icon or right-click the icon and select Parameters -
Edit to display the Edit Device Parameters Window.
2. Select the desired Slice I/O Unit from the list on the I/O Module Tab Page
and click the Edit Button to display the Edit Unit Parameters Window.
3. Select the IN Tab.
4. Select the desired device and double-click the I/O Comment Column to
display the following window. Select the Count Option in the Detection
Mode Area, enter a monitor value in the Value Field, and then click the OK
Button.
5. After checking that the setting for the monitor value is reflected in the Edit
Unit Parameters Window, click the General Tab and click the Download
Button.
6. Click the OK Button.
Section 4-4