One Auto-Crossover Lan 10/100M Port; Using The Reset Button; Making The Connections; Additional Installation Requirements - ZyXEL Communications Prestige 645R-A Series User Manual

Zyxel adsl router user's guide
Table of Contents

Advertisement

2.2.2 One Auto-crossover LAN 10/100M Port

Ethernet 10Base-T/100Base-T networks use Shielded Twisted Pair (STP) cable with RJ-45 that look like a
bigger telephone plug with 8 pins. The LAN port is auto-crossover, so you may use a crossover or a straight-
through Ethernet cable to connect your Prestige to a computer or an external hub.
When the Prestige is on and properly connected to a computer or a hub, the LAN

2.2.3 Using the Reset Button

Hold this button in for more than five seconds to restart the Prestige.
Resetting the Prestige deletes all custom configurations.

2.2.4 Making the Connections

Step 1.
Connecting the DSL line
Connect the RJ-11 DSL port on the Prestige to the POTS splitter using the included DSL cable (telephone
wire). Connect the micro filter(s) (optional– see the Splitters and Microfilters appendix for the details)
between the wall jack and your telephone(s). The micro filters act as low pass filters (voice transmission
takes place in the 0 to 4KHz bandwidth).
Step 2.
Connecting a computer or an external hub to the Prestige's 10/100M LAN port
Be careful not to insert an RJ-11 connector into the RJ-45 port.
Ethernet 10Base-T/100Base-T networks use Shielded Twisted Pair (STP) cable with RJ-45 connectors that
look like a bigger telephone plug with 8 pins. The LAN port is auto-crossover, so you may use a crossover or
a straight-through Ethernet cable to connect your Prestige to a computer or an external hub.
Step 3.
Connecting the power adaptor to your Prestige
Make sure that you use the supplied power adaptor. See Power Adaptor
Connect the power adaptor to the port labeled
2.3

Additional Installation Requirements

A computer must have a properly installed and enabled Ethernet 10Base-T/100Base-T NIC.
A computer equipped with a web browser (with JavaScript enabled) and/or Telnet.
Hardware Installation
LED on the front panel turns on.
Specifications appendix for information.
POWER
Prestige 645R-A Series User's Guide
on the rear panel of your Prestige.
2-3

Advertisement

Table of Contents
loading

Table of Contents