Table of Contents
Advertisement
DIGITAL READOUT MESSAGE CODES
Listed below are message codes and a description of each which may be displayed on the Digital
Readout during the Calibration procedure.
DISPLAY
MESSAGE
E-1,E-2,E-3 OR E-4
CAL
H-X
L-X
OFF
S--
S-X
PS-
P--
Table 2. Digital Readout Message Codes
DESCRIPTION
Refer to "CORRECTIVE MAINTENANCE"
section.
Indicates that system is in the Calibration Mode.
Ready to accept new Upper Temperature Limit
setpoint for this channel, where: X is limit in
hundreds of degrees F.
Ready to accept new Lower Temperature Limit
setpoint for this channel, where: X is limit in
hundreds of degrees F.
Setpoint for this channel is below lower
temperature setpoint limit.
Indicates Automatic Temperature Setback is
disabled.
Indicates Automatic Temperature Setback is
enabled, where: X is tens of minutes to Setback.
Waiting for operator to input new Password to
lock system.
Operator must enter Password to unlock system
and change operating temperatures,
temperature limits, or tip temperature offsets.
73
Advertisement
Table of Contents
