Pulse Plate; Set-Up - Pace PRC 2000 Operation & Maintenance Manual

PULSE PLATE

The PACE PRC 2000 system provides the DC electrical power, voltage level control power receptacles and
LED indicator for controlled miniature plating. The LED indicator illuminates Green during normal
operation and Red in short circuit or over current conditions.
Electronic current sensing and switching is built into the pulse plating power supply. This innovative
capability protects the workpiece from burning and from electrical arcing should the carbon electrode
become exposed through the cotton swab during the swab plating process.

SET-UP

1. Set the POWER switch to the "ON" (1) position.
2. Set FOOT PEDAL Selector Switch to the PULSE
PLATE (PP) position.
Figure 119. Power On
Figure 120. F.P. Selector Switch
93