Table of Contents
Advertisement
OPERATION
CHANNEL LED OPERATION
4. The Channel LED (CH 1, CH 2 or CH 3) of the first
Active Channel encountered by the system (Channel
with connected handpiece) will be illuminated. This is
the Current Channel. The Auxiliary LED (in conjunction
with the appropriate Channel led (CH 1, CH 2 or CH 3)
will illuminate if a Current Channel is an Auxiliary
Channel (AUX 1, AUX 2 or AUX 3). If no Channels are
active (no handpiece connected), only the CH 1 LED
will be illuminated and "E - 1" will be displayed on the
Digital Readout.
5. Disconnect the handpiece from the Power Receptacle
associated with the Current Channel (e.g., If CH 1 LED
is illuminated, disconnect the handpiece connected to
CH 1). The unit will now select the next Active Channel
encountered as the Current Channel and illuminate the
corresponding LED.
6. Reconnect the handpiece removed in step #5.
Figure 26. Channel LEDs
Figure 27. Handpiece Connection, TMC
39
Advertisement
Table of Contents
