Pace PRC 2000 Operation & Maintenance Manual page 91

6. Set the FOOT PEDAL Selector Switch to the
MicroChine (MC) position when foot pedal actuation is
desired. In this mode either the finger switch on the
handpiece or the foot pedal can actuate the
MicroChine.
7. Connect the Probe Brake Lead jack to the PROBE
BRAKE Receptacle and the clip end to a conductor
(which has continuity with the conductor (s)) you want
to protect. See "Workpiece Grounding".
Figure 116. Pedal Selector Switch
Figure 117. Probe Brake Attach.
91