HANDPIECES
Use the Digital Readout Message Codes ("E-1" & "E-2") listed on Table 6 (under "POWER
SOURCE") as a guide to pinpointing any malfunction associated with the handpiece. Refer to
Operation and Maintenance Manual applicable to handpiece for instructions on troubleshooting that
particular handpiece. The following "Heater Assembly Checkout Procedures" are applicable to all
PACE SensaTemp handpieces except for the TT-65 ThermoTweez and DTP-80 Dual ThermoPik
handpieces. Refer to either of the TT-65 manuals (P/N 5050-0300 or 5050-0336) for troubleshooting
procedures pertinent to that handpiece.
Figure 130. Handpiece Connector Plug
104