Table of Contents
Advertisement
SET-UP CONT'D
5. Slide the Hose Clamp over the free end of the Air
Hose. Push clamp back 1 inch from the end of the
Air Hose.
6. Attach the free end of the Air Hose to the nipple on
the Barrel Adapter (10 cc adapter is supplied).
7. Secure the Air Hose to the Barrel Adapter by sliding
the Hose Clamp down over the Air Hose/Barrel
Adapter connection and screwing clamp down to
secure in position.
8. Attach the Barrel Adapter to a barrel prefilled with
material (not supplied). Place the barrel in the
Dispenser Cubby.
9. Insure that the foot pedal is connected to the FOOT
PEDAL Receptacle on the rear panel.
10. Set the FOOT PEDAL Selector Switch to the "PD"
position.
80
Air Hose
Figure 103. Barrel Adapter Connect.
Figure 104. Foot Pedal Select. Switch
Hose
Clamp
Barrel
Adapter
Advertisement
Table of Contents
