15. Press the TIP SET Key once again to enter the TIP
SET Mode. Press and hold the Scroll Up Key.
Observe as the displayed Set Tip Temperature
increases first in 1°, then in 10° increments (°C or °F).
Release the key when the Digital Readout reads 371°C
(or 700°F). Immediately press the TIP SET Key once
again. Observe the Digital Readout as the Operating
Tip Temperature reaches 371°C (or 700°F).
16. Press the °F/°C Key several times to observe the
alternating illumination of the °F & °C LEDS. Each
subsequent pressing of the key will turn one LED on
and the other off. Also notice as the Digital Readout
changes to display the Operating Tip Temperature in °F
when the °F LED is illuminated and in °C when the °C
LED is illuminated.
17. Press the TIP SET Key once to enter the TIP
TEMPERATURE SET Mode. Immediately press & hold
the Scroll Down Key. Observe as the displayed TIP
SET Temperature decreases first in 1° and then in 10°
increments (°C or °F). Release the key when the Digital
Readout displays 343°C (650°F). Immediately press
the TIP SET Key once again (or wait 6 seconds) and observe the Operating Tip Temperature
decrease to 343°C (650°F).
Figure 37. Enter Tip Temp. Set Mode
Figure 38. °F To °C Digital Readout
Figure 39. Decreasing Set Tip Temp.
43