Table of Contents
Advertisement
QUICK CONNECT METHOD CONT'D
3. Attach the ridged end of a male quick connect hose
mount Fitting (P/N 1259-0087) to each end of the 54
inch (137cm) Air Hose. Push and turn hose onto each
Fitting to seat properly. You may install metal hose
clamps (enclosed with system) to further secure
connections.
4. For each air handpiece, attach ridged end of a female
quick connect hose mount Fitting to a 1 inch (2.5cm)
length of clear pvc Air Hose; push and turn hoses onto
Fittings to seat properly. You may install a metal hose
clamp (enclosed with system) to further secure the
connection.
5. Attach the opposite end of the 1 inch (2.5cm) length of
clear pvc Air Hose to the metal tube located at the rear of each handpiece.
6. Connect one end of the long Air Hose (with attached male quick connect hose mount Fitting) to
the 1" (2.5cm) clear pvc Air Hose attached to the rear of the handpiece.
7. For vacuum, insert male quick connect hose mount Fitting attached to the remaining end of the
long Air Hose into female quick connect hose mount Fitting on 1 inch (2.5cm) clear pvc Air
Hose (connected to VisiFilter). For pressure, insert male quick connect hose mount fitting
directly into the Controllable PRESSURE Port.
8. The long Air Hose may now be easily transferred between air handpieces by removal of male
quick connect hose mount Fitting (attached to long Air Hose) from female quick connect hose
mount Fitting at rear of air handpiece and attachment to another air handpiece.
When removing any Air Hose, turn and pull. DO NOT attempt to pull hose
directly off. Damage to or breakage of vacuum fitting or VisiFilter may occur.
9. Connect the handpiece power cable plugs of each air handpiece to the Power Receptacles.
36
Figure 23. Air Hose To Handpiece
CAUTION
AIR
HOSE
FITTING
Advertisement
Table of Contents
