Pace PRC 2000 Operation & Maintenance Manual page 44

Hide thumbs Also See for PRC 2000:
Table of Contents

Advertisement

PANEL CONTROLS CONT'D
18. Press the TIP SET Key once again and use the
Scroll Up and Scroll Down Keys to enter your desired
Set Tip Temperature. Immediately press the TIP SET
Key to exit the TIP SET Mode. This enters the new
Set Tip Temperature for the Current Channel into
system memory.
If a Password has been installed in the system,
press the °F/°C Key to reactivate Password pro-
tection.
19. Note the Current Channel displayed on the system.
Turn the POWER Switch to the OFF ("0") position.
Turn the POWER Switch back to the ON ("1")
position. Using the CH SELECT Key, select the
channel displayed in step #18. Notice that the TIP
OFFSET LED is illuminated to indicate that a TIP
OFFSET CONSTANT higher than the default ("3" for
°C or "6" for °F) has been stored in system memory.
20. Press the TIP OFFSET Key. Notice that the system
has retained the stored TIP OFFSET CONSTANT.
Press the key once again to exit TIP OFFSET Mode.
44
NOTE
Figure 40. Changing Set Tip Temperature
Figure 41. Power Off
Figure 42. Storing Tip Offset Value
KBTIPSUD.EPS

Advertisement

Table of Contents
loading

Table of Contents