Table of Contents
Advertisement
PRIMARY CONTROLS
In the upper left hand corner, you will find the master POWER Switch which controls all power to the unit.
Just to the right of the POWER Switch is a 4-position FOOT PEDAL Selector Switch which directs the
action of the foot pedal connected to the FOOT PEDAL Receptacle (rear panel). This ensures that only
one of the listed functions is activated by the foot pedal at any one time. The switch positions are as
follows:
Figure 1. Primary Controls PD - Paste Dispenser.
Although vacuum and air pressure to air-operated SensaTemp handpieces
is controlled by finger actuated handpiece switches, a second foot pedal can
be connected to any Auxiliary (AUX) channel receptacles (rear panel) of the
THERMAL MANAGEMENT CENTER to control vacuum or air pressure to
these handpieces.
PH - Pulse Heat,
PP - Pulse Plate,
MC - MicroChine,
NOTE
11
Advertisement
Table of Contents
