Table of Contents
Advertisement
5.10.5 LOCKING THE NETTI DYNAMIC
DUAL LEG SUPPORT
The red star knobs allow locking the dynamic
elevation of the leg support plate.
For the dynamic use of the Netti Dynamic system
(OK-C) this should be kept loose to allow for the
knee joint to move (OK-C movement" for the knee
joint).
Locking the leg support may be required if sudden
extension may lead the leg supports to hit persons
or surrounding. it is also required if the wheelchair is
being used as a seat in a car.
5.10.6 LEG SUPPORT MOUNTING AND
REMOVAL
Mount the leg supports to the wheelchair. Ensure an
open angle of the leg support when inserting:
Position the bolt vertical into the frame hole turning
it ca 30 degrees outward for it to enter easy. Turn it
inward until it clicks into user position,.
info@solidworks.com
5.10.7 FOOT PLATE LOCK
With both leg supports in place, the foot-board folds
down into the lock on the right leg support.
The lock is closed by turning the outer ring 90
degrees forward!
The foot-board lock MUST always be closed
when the chair is occupied.
46
My-Netti.com
info@solidworks.com
!
LOCK
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
Advertisement
Table of Contents
