Head Support-Mounting; Leg Support - Mounting - Meyra Netti DYNAMIC AdaptPro User Manual

6.8.5 HEAD SUPPORT-MOUNTING

Netti Dynamic AdaptPro can be equipped
with Netti Dynamic head support.
The head support follows the backwards
extension movement of the neck. This is
beneficial both for users with involuntary
movements and users nodding or banging
the head.
The depth of the head support should be adjusted
to barely touch the back of the user's head when
sitting relaxed.
Head support depth adjustment should be set by
the therapist adjusting the wheelchair to the user.
HEAD SUPPORT MOUNTING AND
REMOVAL.
The Dynamic heads supports for Netti AdaptPro are
easily mounted and removed:
Open the latch on top of the back cylinder house.
The head supports is released and can be removed.
When the latch is open you mount the head support
by inserting the 2 head support rods into the top of
the back cylinder house and close the latch.
The height of the head support needs to be
adjusted to fit directly behind the head giving
support to the lower part of the scull.

6.8.6 LEG SUPPORT - MOUNTING

Netti Dynamic DUAL leg supports are mounted like
this:
Push the leg support fixing bolt vertical into the
extension piece on the wheelchair - keeping the leg
support slightly turned outwards.
The leg support will fall in place and turn into place
itself.
To remove them: Unlock the foot plate. Pull the
leg support slightly upward and swing it outwards
before lifting and detaching it from the chair.
60
My-Netti.com
info@solidworks.com
info@solidworks.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11