Belts And Harnesses - Meyra Netti DYNAMIC AdaptPro User Manual

6.9 BELTS AND HARNESSES

The Dynamic System requires as a minimum, pelvic
stabilizer and ankle huggers to function according
to intention.
Use harnesses, pelvic stabilizers and ankle huggers
/ shoe shells to give the user needed stabilizing
support.
Always use the mounted belts, harnesses and
ankle huggers to secure the user when sitting
in the Netti Dynamic AdaptPro.
Netti Dynamic AdaptPro is prepared for mounting
several different types of pelvic stabilizer and
supportive harnesses, each type developed to give
the user the best stabilization support depending on
the conditions:
• Pelvic stabilizer - (included in Netti Dynamic
System)
• Upper body harnesses
• Ankle huggers
• Shoe shells
PELVIC STABILIZER, mounted to the seat plate, helps
the user to keep his position on the seat even under
full involuntary movement.
HOW TO ADJUST THE PELVIC STABILIZER
The pelvic stabilizer is mounted on the belt fixing
brackets on the seating plate.
• Slide the pelvic stabilizer to a position where it
crosses the upper thighs and angle 70- 90 degrees.
• Adjust the length of the pelvic stabilizer / belt at the
mounting point so that the belt can be tightened.
A pelvic stabilization belt must always be used
when using upper body harness and always be
locked before locking the harness.
THE UPPER HARNESSES are mounted with
Quick-Locks to the harness rail behind the back
support. The Quick locks are easy to open and adjust
at any time.
ANKLE HUGGERS AND SHOE SHELLS
are mounted to the foot board. They help to keep
the feet on the foot board not letting them slide off
during an involuntary movement.
62
My-Netti.com
Max backwards tilt, max recline and
leg supports lifting
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11