Lower Leg Support; Footplates; Footboard - Meyra 1.610 MC1 Operating Manual

Lower leg support

For entry or exiting the footplates resp. foot-
board is to be folded upward [1] + [2] or the
central leg support [2] lowered to the floor.
☞ Check the locking points!
1. Remove both feet from the footplates.
2. Remove the calf belt (3), if present.
☞ Therefore observe chapter Calf belt
on page 25.
☞ Before starting to drive the footplates
resp. footboard need to be folded back
down [4] and the calf belt attached.

Footplates

The footplates can be folded outward and
up [1] resp. inward and down [4].

Footboard

Fold the footboard up before swivelling
away and removing the upper leg support.
Folding up the footboard
In order to fold up the footboard lift the
loose end of the footboard (5) as far as pos-
sible.
Folding the footboard down
In order to fold down the footboard, lower
the loose end of the footboard as far as pos-
sible down onto the footboard bracket [6].
26
1
2
4
6
3
5