Foot-Board Angle Adjustment; Adjustments For Different Leg Lengths - Meyra Netti DYNAMIC AdaptPro User Manual

5.10.3 FOOT-BOARD ANGLE ADJUSTMENT

Loosen the M8 screw on the left foot board with 6 mm
Allen key. This allows the foot-board to rotate. Choose
a foot-board angle to accommodate the user's foot
angle. Fix the screws tightly so that the foot-board
does not move.
1 pc 6 mm Allen key
• The Dual foot-board still allow for some rotation
forward to flex when the user extends his/ her
feet.
• Lubrication of the gliding length profiles with
white Vaseline is important to ensure smooth
function of the Netti Dynamic system leg
supports Dual.
5.10.4 ADJUSTMENTS FOR DIFFERENT LEG
LENGTHS
One-sided foot-board depth adjustment
By uneven leg length or leg position: the leg support
and foot-board depth can be adjusted to compensate
for this by the use of extensions pieces and extension
bracket on the right leg support.
info@solidworks.com
The extension piece is pulled forward and fixed in
needed length on the side where the leg is longer.
The leg support sits in the extension piece and is
therefore also moved forward.
For the foot-board to fall into the foot-board lock after
one sided extension piece adjustment, the foot-board
has to be repositioned.
The foot-board lock is removed from the length profile
where it normally sits - and mounted to the extension
bracket.
The extension bracket is mounted to the length
profile where the lock was sitting.
44
My-Netti.com
info@solidworks.com
info@solidworks.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11