Table of Contents
Advertisement
LEG SUPPORT
Before any actions on the leg support
the electric wheelchair is to be secured
against unintentional rolling motions.
☞ Therefore observe chapter Securing
the electric wheelchair on page 14.
Height adjustment of the leg
support
Before loosening the star screws (3) se-
cure the position of the leg support with
one hand against unintentionally swivel-
ling down!
The inclination of the leg support [1] is man-
ually adjustable.
For height adjustment, loosen the star
screw (3) on each side and lift/lower the leg
support into the desired position [2].
Afterwards retighten the star screws.
Footboard
To decrease the overall length, e.g. for trans-
port or to ease entry or exiting of the user,
the footboard [1] can be folded upward [4].
☞ Observe the jamming area between
footboard and telescopic rod!
–
Remove both feet from the foot plate.
☞ Before starting to drive the footboard is
to be lowered again [1].
32
1
2
4
3
Advertisement
Table of Contents
