Leg Support; Calf Belt; Removing The Calf Belt; Attaching The Calf Belt - Meyra 1.650 iCHAIR MEYLIFE Operating Manual

Electric wheelchair
Table of Contents

Advertisement

LEG SUPPORT

Before any actions on the leg support
the electric wheelchair is to be secured
against unintentional rolling motions.
☞ Therefore observe chapter Securing the
electric wheelchair on page 12.

Calf belt

Do not drive without the calf belt. – Dan-
ger of accidents!
The removable calf belt (1) prevents the feet
from sliding off the back of the footplates.
☞ The calf belt must be removed in order
to swivel away the leg supports [2].
☞ The calf belt is omitted for angle adjust-
able leg supports and is replaced by a
calf pad.

Removing the calf belt

For removal the calf belt is to be pulled from
the attachment pins (3).

Attaching the calf belt

For attachment both loops of the calf belt
are slid over the attachment pins (3).

Length adjustment of the calf belt

For length adjustment, the calf belt is guid-
ed around the special attachment pins (3)
and adjusted in length with a velcro fasten-
er.
2
1
3
21

Advertisement

Table of Contents
loading

Table of Contents