Angle Adjustable Leg Supports - Meyra Netti DYNAMIC AdaptPro User Manual

5.10.8 ANGLE ADJUSTABLE LEG
SUPPORTS
The angle adjustable leg supports are swing-able,
height adjustable and removable. They come with
height- and depth adjustable calf supports. The foot
plates are hinged, and can be angled in fixed positions.
The foot plates come with a lock connecting the 2
plates which makes the plates stronger. If locking is not
wanted, the bolt can be removed by using an Allen key
with no loss of functionality.
MOUNTING OF ANGLE ADJUSTABLE LEG SUPPORT
STANDARD:
LEG SUPPORT MOUNTING INSTRUCTION:
• Fold the foot plates up.
• Hold the leg support on the top joint, and place it
in the leg support bracket on the wheelchair in an
outward turned angle as shown in the picture.
• Swing the leg support inwards and push slightly
downwards until it goes into locked position.
ANGLE ADJUSTMENT
• Loosen the star wheel on the outside of the leg
support.
• Lift the lower part of the leg support to required
angle.
• Tighten the star wheel.
Be aware of squeeze hazard between
moving parts.
FOOT PLATE HEIGHT ADJUSTMENT:
The foot plates are step less height adjustable.
• Unfix the adjustment screw so that the adjustment
bar moves freely.
• Slide the foot plate to required height,
• Tighten the screw.
As an accessory a star knob or a lever handle
can replace the screw.
FOOT PLATE ANGLE ADJUSTMENT:
• Loosen the screw on the outside of the foot plate -
see picture - with an Allen key.
• Tilt the foot plate to required angle and tighten the
screw.
5 mm Allen key
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
47
My-Netti.com