Transfer To And From The Wheelchair; Using A Patient Hoist - Meyra Netti DYNAMIC AdaptPro User Manual

6.6 TRANSFER TO AND FROM THE
WHEELCHAIR
Techniques for transferring to / from the
wheelchair should be practiced well with the
persons involved.
Some important advices for preparation of the
chair:
• The wheelchair should be placed as close as
possible to the destination of the transfer.
• Make sure the brakes of the wheelchair are
activated to prevent it rolling away.
• Remove the leg support and swing away the
arm support on the side of the transfer.

6.7 USING A PATIENT HOIST:

• Make sure the brakes of the wheelchair are
activated to prevent it rolling away.
• Tilt the chair slightly backwards
• Remove the leg support
• Open the back support angle slightly while
holding the user and adjusting the hoist
behind the users back.
• Option: Swing away the arm supports to get
closer to the patient and / or remove the head
support.
• Replace the components when the transfer is
finished.
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
57
My-Netti.com